All vehicles, engines, and orders over $999.99 ship FREE!

Piranha 90cc Kick start engine only

Free Shipping!

Piranha 86cc Pit Bike or ATV engine.


  • big valve E22 Performance head
  • 4 speed semi-auto transmission (4 gears Up)
  • Comes complete with Kicker, Intake Manifold and gaskets, and gear shifter.


Displacement 86cc
Engine Type Air Cooled, Single-Cylinder, 2-valve, 4-stroke
Bore/Stroke 47mmx49.5mm
Final Drive Chain
Fuel Delivery no
Fuel Unleaded / 93 Octaine
Reccomended Engine Oil 10W-40 Petroleum Based (Nonsynthetic)
Kick Start Yes
Electric Start no
CDI no
Auxillary Output Yes
Transmission 4-Speed Semi Auto (Four Up)
Shift-Pattern Four-speed Transmission: N-1-2-3-4
Semi auto (no hand clutch)

Type 4-Stroke single-cylinder OHC air cooledPiranha 90cc

Engine Specs

Bore: 47mm


Displacement: 86cc

Big Valve E22 Head

Gears:4 speed ,Bottom neutral

Carb: None

Ignition:CDI Flywheel type

Starting pit bike engines will take some practice. All pit bike engines have relatively high compression ratios and require a "quality over quantity " approach in order to ensure quick start ups and avoid mechanical mishaps. It is important follow this routine the first few times when first attempting to start your bike. 

  1. Slowly kick engine over until the kick start reaches a compression stroke (the point in which the kick start lever is hardest to push down.)
  2. Slowly continue to press the kick starter until the engine rotates slightly through the firmest point in the compression stroke.
  3. Allow the kick start lever to return back its top rest position
  4. With a quick and balanced motion - Move down forcefully on the kick lever. These motors need a strong, quick kick to get started.
  5. If you fail to follow this procedure, especially with longer stroke engines or 125cc + bores you can cause serious damage to your crankcase, clutch and transmissions assemblies!

Tips to Avoid kickback 

  1. Hold onto the crossbar pad with your throttle hand while kicking the bike over to avoid twisting the throttle open by accident
  2. Before start up - turn the idle screw on the carburetor in a turn or 2 (turn the screw back out to normal idle setting once running.)
  3. Use a digital CDI with variable ignition timing at start-up, this will help reduce kick back and allow the bike to start much easier compared to the stock CDI unit.
  4. If ignition timing is adjustable it should be adjusted to the minimum
  5. Furious, repeated kicking will not get the engine started - firm, full stroke kicks are the only way to get them to start first kick, every time "Quality over Quantity"
  6. Throttle must be completely closed when you kick the engine over or it will kick back EVERY TIME.
  7. A small blip of the throttle maybe used when the engine is hot if required but NO more than 10 ° opening of the throttle in any case.